Tips To Ensure That Your Wi-Fi Is Private And Blocking Hackers

Wi-Fi
Gadget ReviewsGamingGaming Tips & GuidesHow-Tos

Since everybody is so into using Wi-Fi broadband services these days, people should know how to secure their connection from unauthorized users. Whether you are using your Wi-Fi at home or workplace, it is very important to know who has access to your connection. An unknown user could be using your Wi-Fi to stream pirated movies, taking over your bandwidth, and probably throw you into illegal cases. In the worst scenario, they could be trying to hack into your system. More than 49% of routers are found to be vulnerable. However, many tools and tricks can protect your Wi-Fi from unauthorized users.

Tips To Secure Your Wi-Fi Connection

Wi-Fi hackers

1. Don’t Let Out Your Router Details 

It would help if you considered changing your service set identifier (SSID) when you are in your router settings. The SSID shows the name of your network to the outside world, and unless you decide to change your name, it will default the network to the manufacturer’s name. It is very easy to search for admin logins on the internet, which only makes the hacker’s job easier. Setting it as random is more protective than using the router’s default name, along with IP router login. It becomes much easier to dive into a connection that isn’t tagged to its admin.

2. Change Password

The default login setting should be set in the router temporarily. Change your password into something long and tricky, and also change your username. It would be more beneficial if you set up a password that is long and random. However, many people ignore this advice because nobody wants to go through the hassle of joining the Wi-Fi network repeatedly. But how often do you have to type the password? When you are inside the work premises or in your home, there is barely a chance of doing so after the initial setup.

3. Update Software

Research tells that only 14 % to 15% of broadband users update the firmware of their router. If you are among the 86% who haven’t updated their router’s firmware, it is advised to do it as quickly as possible. Updating the system software ensures the network’s security and saves money and time. This is the easiest method, but people often ignore it. In addition, most of the routers have default updates, although a firmware boost may relapse to a default setting where this is disabled. Hence, it is vital to see whether your router has the same procedure.

4. Disable WPS

Wi-Fi Protected Setup (WPS) may build inscribed links between your connection and an appliance supporting the program by entering a PIN. Disabling this feature might not seem like a good idea, but it makes more sense if you focus on the feature base. WPS uses a seven-digit passcode which makes attack attempts easier. The worst thing is that most routers do not allow cooling of duration between chances to break down the WPS code.

5. Installing Alternative Firmware

Wi-Fi anonymous

Sometimes the users tend to take the message of installation of hardware too seriously and end up installing alternative hardware. For example, if you consider your router to be a mini-computer, it is similar to switching from Windows to a Linux/Windows distro.

This has to be done to achieve the functionality which was missing from the firmware that was original, especially related to security.

6. Employing MAC Filtering

MAC or media access code Can help in allocating every device that is connected to your network. MAC is a Digital identifier of 14-bit. It is used by Your router or any device of that sort for tagging the network packets.

By default, your device or your router gets automatically gets connected to any device that allows access if it has the password. Media access code comes in the picture when you do not want any other devices to get connected to your router, even if they have the password. Mac address code helps you in preventing any other devices from getting connected to your router. You can go to websites like What’s my IP and identify the connected devices allowed have you don’t recognize them. Once you have identified the device, you can go to the section that controls the access on your router and block all the devices trying to connect with your Wi-Fi or block them individually.

7. Using VPN (Virtual Private Network)

 VPN mostly supports any router, even if you are using the old firmware or updated to a new alternative. Though it is mostly used with third-party software that helps re-routing the internet traffic, using a VPN for your router can be your special benefit.

Using VPN will help you access your network with more secrecy. VPN also offers you end-to-end encryption as a paid service does. This will help you in Browsing your web without any fear of data leakage.

8. By Setting Up Guest Network

Securing your WiFi network

When you keep sharing your WI-FI password with everyone who comes to your house, you are already putting your data at risk. You never know when the password falls in the wrong hands. 

You can always keep changing your password as you give it out to others, but that will not be very convenient for you and the regular users of the WI-FI.

Instead, you can use many routers as an alternative as this will allow you to create guest network setups for the visitors. This means that you will provide your guests with a key to virtually allowing them to connect without disclosing the connected devices. The router you are using does not allow setting up a guest network; you can always update the firmware or, if possible, for a new model.

So, the above were different ways by which you can ensure that your WI-FI is private and blocking hackers. Although there are many ways by which you can protect your Wi-Fi, the ones mentioned above are some of the most reliable ones.

Still have questions, or want to know more about the latest tech news and console wares? Contact us at techsngames.com today!

Leave a Reply

Your email address will not be published. Required fields are marked *